Pro-fax EP349U high flow polypropylene impact copolymer is available in pellet form. This resin is typically used in thin-wall injection molding applications and offers very good low temperature impact resistance.
Pro-fax EP349U
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 80 g/10 min |
| Density (23 °C) | 0.90 g/cm³ |
| Flexural Modulus (0.05 in/min, 1% Secant, Procedure A) | 155000 psi |
| Flexural Modulus (1.3 mm/min, 1% Secant, Procedure A) | 1070 MPa |
| Tensile Strength at Yield (2 in/min) | 3100 psi |
| Tensile Strength at Yield (50 mm/min) | 21 MPa |
| Tensile Elongation at Yield | 5 % |
| Notched Izod Impact Strength (73 °F, Method A) | 2.2 ft-lb/in |
| Notched Izod Impact Strength (23 °C, Method A) | 117 J/m |
| Deflection Temperature Under Load (66 psi, Unannealed) | 212 °F |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 100 °C |
Technical Data Sheet
Technical Data Sheet - ASTMProcess
Injection Molding
Resin
Polypropylene, Impact Copolymer
Applications
Housewares, Sports, Leisure & Toys, TWIM Food Containers